Healthy Wave Far Infrared Ceramic Sauna + Ionizer XL $410.00 Silver
Dimensions 40.5" tall 32" wide, 33 deep

Healthy Wave Far Infrared Ceramic Sauna + Ionizer XL Silver
Extra Large Infra Spa [I-Spa] + Ceramic Heater + Ionizer + Foot Pad Specifications:
Model: Healthy Waves Portable Sauna
Voltage:  AC 110-120V
Frequency 60Hz
Attains full heat in: 5 minutes
Temperature 125-149 F
Power cord length 9.5 feet
Dimension L*W*H Size XL 40.55 * 31.49* 33"
Dimensions folded Size XL 5.51* 31.49*41.33
Infrared Panel 3 FIR Material-Coated Heating Panels on Walls 
Assembly Time 30 Sec.- 1 Min.
Packing Information  Main Unit x 1
Ceramic Heater x 1
Ionizer x 1
Manual x1

------------------------
The sidewalls and back walls have Carbon Fiber FIR heating elements.
The ceramic heater which is included is placed on the foam floor, and works extremely well in very cold weather.
When the FIR Sauna tent heats up to 65 ¡ã C (149 ¡ã F), the FIR materials can emit 95% of energy as heat.
It takes only 5 minutes to reach 65 ¡ã C (149 ¡ã F) constant temperature.
Low operating cost.
Super conductive heating: with the power of only 1500 watts, it can radiate energy equivalent to that of ordinary heating materials at 2600 watts.
Depending on the individual, the volume of perspiration can reach up to 500 cc in 10 minutes.
It takes only a minute to set up or dismantle the device. No mess to clean up; just wipe with a wet towel.
Weighs only 11 kg. Dry and portable. Use in a wide variety of locations.
1~5 level temperature control.
Automatic temperature control of the ceramic heater.



List of components
A- Electronic controls
B- Cover for top opening
C- Neck Band
D- Zipper for Sauna Entrance
E- Zipper for arm openings
F- Handheld Control Panel (heating & timer)
G- Sidewalls & back wall covered with FIR material
H- Ceramic Heater
I- Folding Chair
J- Ionizer 



Portable Infrared Sauna I-Spa Turbo Control Panel

Press the ¡°POWER¡± button on the panel. The LED (TEMP) at the left will show the default temperature at level 3 and the LED (TIME) at the right will show the default time at 5 minutes.
Press ¡°H¡± button on the right. The FIR heating panels will begin heating and the indicator will light.
The ¡°W¡± button on the left works as ¡°START¡± or ¡°STOP¡± for the ceramic heater. It is not necessary to adjust the ceramic heater during use because it has an automatic temperature control function.
Temperature settings: a total of 5 levels: level 3 is medium; level 5 is the highest and usually for winter months while level 1 is the lowest and is suitable for frail persons. It is recommended to choose a suitable temperature depending on the needs of the user. The level can always be changed during a sauna session by pressing ¡°+¡± or ¡°-¡± under ¡°TEMP¡± LED.
Time setting: Maximum 20 minutes. Press ¡°+¡± or ¡°-¡± button under ¡°TIME¡± LED to set working time. It will increase or decrease 5 minutes for each time pressed.
When the timer counts down to 20 seconds, a beep will sound three times to warn you to continue heating or to end the session. If you need to continue heating, repeat 1-5 above. If you choose to end, wait for 30 seconds until the sound of a long beep indicates the session is over.



Benefits
  • Weight Loss - Burn 600 calories in 30 minutes
  • Detoxify - Beautify / Skin Care
  • Relieve Pain - Arthritis / Chronic Pain / Sports Injury / Treat Injuries
  • Soothing Heat
  • Boost Immune System